CW-1592TH-AB automatic insole cut machine

 1.Engraving depth is controllable to perform surface marking or deep   engraving, even quick cutting. 

 2. The marking range is up to 600*600mm, which breaks the limitation  of the range of glass tube marking and provides a more efficient and   high quality solution for denim whitening, hole cutting and upper cutting. 

 3. Increase product value, permanent mark can be anti-counterfeit,   non-contact mark and no pollution, can be layered, and achieve the   perfect combination of surface engraving, hollowing and cutting. 

 4. With 3D dynamic focusing system which beautifully compensated for the weakening effect of the edge of the traditional machine.       

Automatic intelligent line drawing, cutting Laser cutting machine, an automatic intelligent upper line drawing and cutting equipment developed for the shoe upper automatic drawing line, used to replace the traditional shoe making process such as manual line drawing and screen printing. 

 Chanxan pioneered the patented product and cut the hot melt adhesive for the upper; 

 Solve the edge of the hot melt adhesive and the uneven pressing phenomenon; 

 Non-contact cutting, product efficiency and standard; 

 Intelligent typesetting, maximizing material saving; Easy to learn and save labor; 

 Double feed table cross feed, fully automatic loading and unloading, improve work efficiency 3-5 times .    

Especially suited to cut textiles 

Ability to cut all sorts of raw materials 

Standard equipped with head camera 

Vision system is optional 

Suitable for high-production environments 

Fast processing for more throughput in less time

1. Using projection technology to accurately align the flying woven upper

2. cutting speed is fast, laser head can be selected according to requirements

3. the equipment is stable, easy to operate

4. the projector has high pixel, thin lines and more accurate positioning

5. the machine has low energy consumption, is the necessary equipment for the production of flying woven uppers

6. Chanxan exclusive technology can cut multi-layer composite midsole material   

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

High-precision servo screw motion system, tested by precision collimator during installation andaligning.

Excellent stop point restart function to effectively reduce the failure rate caused by improper operation.

Non-contact cutting with no mechanical stress to deliver niceand auto sealing cutting edge without deformation,  no need for polishing.

The high-power laser greatly improves the cutting and engraving speed up to 2-5 times faster, which can meet  the efficient cutting of thick boards.  

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-offr   continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

The software recognizes the contour of the graphic, automatically generates the cutting path and completes the cutting. 

The waste of materials and time caused by inaccurate positioning is avoided. Machine supports camera calibration compensation, and corrects the overall offset that occurs after the device has been running for a period of time to ensure accurate contour cutting. 

The Residual Amount Control System is used to detect the length of the cloth balance by the sensor probe, and the feeding motor is automatically turned on and off to achieve the free and non-stretching conveyance of the cloth. 

High pixel capture graphics with a maximum recognition area of up to 4 square meters.

1. Using projection technology to accurately align the flying woven upper

2. cutting speed is fast, laser head can be selected according to requirements

3. the equipment is stable, easy to operate

4. the projector has high pixel, thin lines and more accurate positioning

5. the machine has low energy consumption, is the necessary equipment for the production of flying woven uppers

6. Chanxan exclusive technology can cut multi-layer composite midsole material   

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Steady machine with imported laser source, marble platform, cast aluminum gantry structure and cast iron chassis. 

High-precision machine tools and high-precision servo and ball screw drive ensure position accuracy and dimensional accuracy,  better roundness and better corner effect.  

Stable running and energy control enable the machine to cut out the product's edge with less heat affected zone, smoother trimming  effect, and the effect is consistent.

The software has superior performance, and can realize the functions of layered cutting, cutting path optimization, laser energy  following speed, etc. The cutting effect is consistent and the material half-cut energy .