Laser cutting in textile and leather

 Chanxan pioneered the patented product and cut the hot melt adhesive for the upper; 

 Solve the edge of the hot melt adhesive and the uneven pressing phenomenon; 

 Non-contact cutting, product efficiency and standard; 

 Intelligent typesetting, maximizing material saving; Easy to learn and save labor; 

 Double feed table cross feed, fully automatic loading and unloading, improve work efficiency 3-5 times .    

Chanxan's first patented product, the exclusive technology can perfectly cut 3mm thick midsole plate 

Move the countertops to greatly increase production efficiency 

Non-contact cutting, more standard products Intelligent typography cuts small seams and saves materials up to 20% Beautiful cut, material cut is not black One-stop solution for grading, typesetting and cutting, so that production is worry-free 

No need for die, cost savings and fast proofing Easy to learn and easy to learn, no safety hazards

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Faster than a cutting plotter

more precise than punching dies

more economical for small series up to 1,000 pieces

Five-axis linkage cutting with three-dimensional programming which is easy to learn. Machine is good at cutting complex 3D materials.

The laser is non-contact cutting without mechanical stress. Its simple positioning fifixtures have low cost, and can be used cyclically  for permanent use.

Machine will learn the movement track required by the user with various control parameters. It will form the program file and transfer to the motion control card, and then move according to the program file to processing the product.

The cutting edge is smooth, burr-free, high precision, high efficiency .   

Faster than a cutting plotter

more precise than punching dies

more economical for small series up to 1,000 pieces

Innovative process development, avoiding the problem of traditional laser cutting of the edge-smoked black smoked black.

High-performance motherboard, anti-interference, more complete data output, power-off continuous carving, slope carving.

Fast curve cutting function: Any curve can be cut continuously in rapid succession.

With power, frequency and speed follow function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect.

The software design path can be optimized as needed to reduce processing time and improve efficiency.

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

1. The software recognizes the contour of the graphic, automatically generates the cutting path and completes the cutting. The waste of materials and time caused by inaccurate positioning is avoided.

2. Machine supports camera calibration compensation, and corrects the overall offset that occurs after the device has been running for a period of time to ensure accurate contour cutting.

3. The Residual Amount Control System is used to detect the length of the cloth balance by the sensor probe, and the feeding motor is automatically turned on and off to achieve the free and non-stretching conveyance of the cloth.

4. High pixel capture graphics with a maximum recognition area of up to 4 square meters.   

Automatic intelligent line drawing, cutting Laser cutting machine, an automatic intelligent upper line drawing and cutting equipment developed for the shoe upper automatic drawing line, used to replace the traditional shoe making process such as manual line drawing and screen printing. 

High-precision servo screw motion system, tested by precision collimator during installation andaligning.

Excellent stop point restart function to effectively reduce the failure rate caused by improper operation.

Non-contact cutting with no mechanical stress to deliver niceand auto sealing cutting edge without deformation,  no need for polishing.

The high-power laser greatly improves the cutting and engraving speed up to 2-5 times faster, which can meet  the efficient cutting of thick boards.  

1. Using projection technology to accurately align the flying woven upper

2. cutting speed is fast, laser head can be selected according to requirements

3. the equipment is stable, easy to operate

4. the projector has high pixel, thin lines and more accurate positioning

5. the machine has low energy consumption, is the necessary equipment for the production of flying woven uppers

6. Chanxan exclusive technology can cut multi-layer composite midsole material   

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.