Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface  engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.   The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  

1. High-precision servo screw motion system, tested by precision collimator during installation andaligning.

2. Excellent stop point restart function to effectively reduce the failure rate caused by improper operation.

3. Non-contact cutting with no mechanical stress to deliver niceand auto sealing cutting edge without deformation, no need for polishing.

4.  The high-power laser greatly improves the cutting and engraving speed up to 2-5 times faster, which can meet the efficient cutting of thick boards.    

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Faster than a cutting plotter

more precise than punching dies

more economical for small series up to 1,000 pieces

Innovative process development, avoiding the problem of traditional laser cutting of the edge-smoked black smoked black.

High-performance motherboard, anti-interference, more complete data output, power-off continuous carving, slope carving.

Fast curve cutting function: Any curve can be cut continuously in rapid succession.

With power, frequency and speed follow function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect.

The software design path can be optimized as needed to reduce processing time and improve efficiency.

With a CO2 laser you can cut acrylic glass and get flame-polished edges without additional material processing.

extreme accuracy 

clean cuts and sealed fabric edges to prevent fraying 

can be used to cut many different materials, like silk, nylon, leather, neoprene, polyester and cotton 

no need to touch the garment 

no unintended marks left on the fabric

Laser engraving from wood, leather, cardboard, glass and plastics 

Laser cutting from thin (up to 3-5mm) wood, leather, textiles and plastics

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. 

And machine is with power-off  continuous carving, slope carving function. Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect.  

The software design path can be optimized as needed to reduce processing time and improve efficiency. CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.