The software recognizes the contour of the graphic, automatically generates the cutting path and completes the cutting. 

The waste of materials and time caused by inaccurate positioning is avoided. Machine supports camera calibration compensation, and corrects the overall offset that occurs after the device has been running for a period of time to ensure accurate contour cutting. 

The Residual Amount Control System is used to detect the length of the cloth balance by the sensor probe, and the feeding motor is automatically turned on and off to achieve the free and non-stretching conveyance of the cloth. 

High pixel capture graphics with a maximum recognition area of up to 4 square meters.

1. High-precision servo screw motion system, tested by precision collimator during installation andaligning.

2. Excellent stop point restart function to effectively reduce the failure rate caused by improper operation.

3. Non-contact cutting with no mechanical stress to deliver niceand auto sealing cutting edge without deformation, no need for polishing.

4.  The high-power laser greatly improves the cutting and engraving speed up to 2-5 times faster, which can meet the efficient cutting of thick boards.    

Five-axis linkage cutting with three-dimensional programming which is easy to learn. Machine is good at cutting complex 3D materials.

The laser is non-contact cutting without mechanical stress. Its simple positioning fifixtures have low cost, and can be used cyclically  for permanent use.

Machine will learn the movement track required by the user with various control parameters. It will form the program file and transfer to the motion control card, and then move according to the program file to processing the product.

The cutting edge is smooth, burr-free, high precision, high efficiency .   

Steady machine with imported laser source, marble platform, cast aluminum gantry structure and cast iron chassis. 

High-precision machine tools and high-precision servo and ball screw drive ensure position accuracy and dimensional accuracy,  better roundness and better corner effect.  

Stable running and energy control enable the machine to cut out the product's edge with less heat affected zone, smoother trimming  effect, and the effect is consistent.

The software has superior performance, and can realize the functions of layered cutting, cutting path optimization, laser energy  following speed, etc. The cutting effect is consistent and the material half-cut energy .  

1.Large format table design for large size non-metallic materials. And the height of the work surface is designed to conform to   human mechanics. 

2. Machine can cut large areas of wool, artificial leather. White cloth cutting will have no yellow edges, clean cloth cutting will have no   hard edges, and fluffy cloth cutting will not burn extra furs. 

3. With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes   sharp angle cutting technology more perfect.

4. Combined with rich practical experience, the cutting process is continuously improved, and it is listed top at the domestic market   in the fifield of cutting of fiber-made boards (such as acoustic /PET panels).

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-off continuous carving, slope carving function. 

 Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

 With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect. 

 The software design path can be optimized as needed to reduce processing time and improve efficiency. CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency  

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-offr   continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge.

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-off  continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.