laser cutting machine for cake toppers

Chanxan's first patented product, the exclusive technology can perfectly cut 3mm thick midsole plate 

Move the countertops to greatly increase production efficiency 

Non-contact cutting, more standard products Intelligent typography cuts small seams and saves materials up to 20% Beautiful cut, material cut is not black One-stop solution for grading, typesetting and cutting, so that production is worry-free 

No need for die, cost savings and fast proofing Easy to learn and easy to learn, no safety hazards

1. Using projection technology to accurately align the flying woven upper

2. cutting speed is fast, laser head can be selected according to requirements

3. the equipment is stable, easy to operate

4. the projector has high pixel, thin lines and more accurate positioning

5. the machine has low energy consumption, is the necessary equipment for the production of flying woven uppers

6. Chanxan exclusive technology can cut multi-layer composite midsole material   

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

No tool change during processing operations 

Flexibility and customization 

Neat and sealed edges even in case of micro-holes 

No material waste 

Rapid and precise micro-drilling 

Minimum use of power resources 

Micro-drilling would be impossible through other systems

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

extreme accuracy 

clean cuts and sealed fabric edges to prevent fraying 

can be used to cut many different materials, like silk, nylon, leather, neoprene, polyester and cotton 

no need to touch the garment 

no unintended marks left on the fabric

1. Using projection technology to accurately align the flying woven upper

2. cutting speed is fast, laser head can be selected according to requirements

3. the equipment is stable, easy to operate

4. the projector has high pixel, thin lines and more accurate positioning

5. the machine has low energy consumption, is the necessary equipment for the production of flying woven uppers

6. Chanxan exclusive technology can cut multi-layer composite midsole material   

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-off continuous carving, slope carving function. 

 Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

 With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect. 

 The software design path can be optimized as needed to reduce processing time and improve efficiency. CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency  

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

1.Large format table design for large size non-metallic materials. And the height of the work surface is designed to conform to   human mechanics. 

2. Machine can cut large areas of wool, artificial leather. White cloth cutting will have no yellow edges, clean cloth cutting will have no   hard edges, and fluffy cloth cutting will not burn extra furs. 

3. With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes   sharp angle cutting technology more perfect.

4. Combined with rich practical experience, the cutting process is continuously improved, and it is listed top at the domestic market   in the fifield of cutting of fiber-made boards (such as acoustic /PET panels).

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.