Home > Products > Laser Cutting > CO2 Laser Cutting Machine
CO2 LAZER MAKİNA 50W 60W 30X50 CM 40X60 CM DÜZ STANDARD MAKİNA
Bu makine aşağıdakiler ürünler için uygundur:
Kaşe, Ağaç işleri, Tekstil kesimi, Endüstriyel proto tipleme, Endüstriyel işaretleme, Tıbbi parçaları işaretleme, Havacılık, Mimari modelleme, Özel reklamcılık, Plastik imalat, Flekso, Lastik pullar, Resim çerçevesi, Hediye üretimi, Çubuk kodlama, Gravür,Çonta kesimi, Bulmacalar, Dolaplar, Ödüller, Kişiselleştirilmiş kalemler, Kapı kolları, Kesilmiş kaydırma desenleri, Oyuncaklar, Mücevher kutuları, Masa takımları, Fotoğraf albümleri.
18013061176
| Cast acrylic | Cast acrylic enables high-contrast white engraving and is particularly popular for POS displays or letters. |
| Extruded acrylic | The engraving on laser-engraved, extruded acrylic turns matt grey and is often used for models and interlocking applications. |
| PES film | Plastic films can be laser cut and laser engraved very easily. |
| Foam PE | Foams are good for laser cutting, engraving and marking. Laser cutting creates neatly fused and sealed edges. |
| ABS | With a fiber laser, a large number of commercially used plastics such as polycarbonate, ABS, polyamide and many more can be marked permanently, quickly and in high quality. |
| Polyamide (PA) | Almost all types of plastic such as PA can be marked with a fiber laser permanently and in a high quality. |
| Polybutylene terephthalate (PBT) | Polybutylene terephthalate (PBT) is one of the most suitable types of plastic for laser marking with a laser machine. |
| Polycarbonate (PC) | Polycarbonate (PC) is transparent, heat-resistant and impact-resistant and can be marked permanently, quickly and in a high quality with the fiber laser. |
| Polyethylene (PE) | Polyethylene (PE) is one of the plastics on which logos, codes or serial numbers can be marked with a laser machine. |
| Polyethylene terephthalate (PET) | Polyethylene terephthalate is a thermoplastic material that is very easy to cut with a laser machine. |
| Polyimide (PI) | PI plastic is a non-meltable high-temperature polymer and can be laser cut or refined with a laser engraving. |
Polyoxymethylene (POM) – i.e. Delrin® | Polyoxymethylene (POM) is one of the most suitable types of plastic for laser marking with a laser machine. |
| Polyphenylene sulfide (PPS) | Polyphenylene sulfide (PPS) is one of the plastics on which logos, codes or serial numbers can be marked with a laser machine. |
| Polypropylene (PP) | Polypropylenes (PP) can be cut with the laser machine with clear and clean cut edges. |
| Polystyrene | Polystyrene is one of the plastics that can be marked and cut with the laser machine. |
| Polyurethane (PU, PUR) | Almost all types of plastic such as polyurethane (PU, PUR) can be permanently marked with a fiber laser in a high quality finish. |
Subscriber：CO2 Lazer Kesim Makinası
