Home > Products > Laser Cutting > CO2 Laser Cutting Machine
Use Laser Cutting Machines for Holiday Decor
With laser cutting, you can manufacture components without contact and therefore wear-free.
With the laser machine you can process a variety of plastics such as PMMA – acrylic, polycarbonate, ABS, polypropylene, Delrin, polyamide, POM, polyester or polyethylene.
18013061176
Cast acrylic | Cast acrylic enables high-contrast white engraving and is particularly popular for POS displays or letters. |
Extruded acrylic | The engraving on laser-engraved, extruded acrylic turns matt grey and is often used for models and interlocking applications. |
PES film | Plastic films can be laser cut and laser engraved very easily. |
Foam PE | Foams are good for laser cutting, engraving and marking. Laser cutting creates neatly fused and sealed edges. |
ABS | With a fiber laser, a large number of commercially used plastics such as polycarbonate, ABS, polyamide and many more can be marked permanently, quickly and in high quality. |
Polyamide (PA) | Almost all types of plastic such as PA can be marked with a fiber laser permanently and in a high quality. |
Polybutylene terephthalate (PBT) | Polybutylene terephthalate (PBT) is one of the most suitable types of plastic for laser marking with a laser machine. |
Polycarbonate (PC) | Polycarbonate (PC) is transparent, heat-resistant and impact-resistant and can be marked permanently, quickly and in a high quality with the fiber laser. |
Polyethylene (PE) | Polyethylene (PE) is one of the plastics on which logos, codes or serial numbers can be marked with a laser machine. |
Polyethylene terephthalate (PET) | Polyethylene terephthalate is a thermoplastic material that is very easy to cut with a laser machine. |
Polyimide (PI) | PI plastic is a non-meltable high-temperature polymer and can be laser cut or refined with a laser engraving. |
Polyoxymethylene (POM) – i.e. Delrin® | Polyoxymethylene (POM) is one of the most suitable types of plastic for laser marking with a laser machine. |
Polyphenylene sulfide (PPS) | Polyphenylene sulfide (PPS) is one of the plastics on which logos, codes or serial numbers can be marked with a laser machine. |
Polypropylene (PP) | Polypropylenes (PP) can be cut with the laser machine with clear and clean cut edges. |
Polystyrene | Polystyrene is one of the plastics that can be marked and cut with the laser machine. |
Polyurethane (PU, PUR) | Almost all types of plastic such as polyurethane (PU, PUR) can be permanently marked with a fiber laser in a high quality finish. |
Subscriber:Laser cut christmas ornaments