Laser Engraving Heat Transfer Vinyl/Paper

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.  The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  .

 1.Engraving depth is controllable to perform surface marking or deep   engraving, even quick cutting. 

 2. The marking range is up to 600*600mm, which breaks the limitation  of the range of glass tube marking and provides a more efficient and   high quality solution for denim whitening, hole cutting and upper cutting. 

 3. Increase product value, permanent mark can be anti-counterfeit,   non-contact mark and no pollution, can be layered, and achieve the   perfect combination of surface engraving, hollowing and cutting. 

 4. With 3D dynamic focusing system which beautifully compensated for the weakening effect of the edge of the traditional machine.       

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.  The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  .

Ideally suited for the engraving, hollow-out and burn-out of jeans, leather, and other vclothing or footwear materials. 

Uses the combined action of CO2 laser with radiofrequency.

1. Engraving depth is controllable to perform surface marking or deep  engraving, even quick cutting.

2. The marking range is up to 600*600mm, which breaks the limitation  of the range of glass tube marking and provides a more efficient and  high quality solution for denim whitening, hole cutting and upper cutting.

3. Increase product value, permanent mark can be anti-counterfeit,  non-contact mark and no pollution, can be layered, and achieve the  perfect combination of surface engraving, hollowing and cutting.

4. With 3D dynamic focusing system which beautifully compensated for  the weakening effect of the edge of the traditional machine. 

No consumables, low processing cost, clear and exquisite cutting and  engraving process, suitable for most non-metallic products, such as bamboo  and wooden crafts, greeting cards, plastic bottles, fabric leather and so on. 

It is one-time investment which can save around 7,000.00-9,000.00 USD  of ink consumables per year; The work cost is low and the power  consumption of the main body of machine is less than 1 Kw/h. 

Engraving depth is controllable to perform surface marking or deep  engraving. The engraved product is not easy to corrode and deform    

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface  engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.   The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface  engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.   The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.  The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  .

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.  The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  .

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.  The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  .

It adopts imported or high-quality domestic CO2 RF laser source, which has better beam quality, high photoelectric   conversion rate and good performance.  

High engraving precision, clear marking machine, not easy to wear, fast marking speed, stable performance,   no consumables for equipment.

Long working life, stable laser output, suitable for industrial long-term continuous work, and can be refifilled   with gas continuing to use.

Support PLT, PCX, DXF, BMP and other documents, directly use SHX, TTF fonts, support automatic coding, serial number,   batch number, date, barcode and QR code marking, software has graphic anti-play function.    

No consumables, low processing cost, clear and exquisite cutting and  engraving process, suitable for most non-metallic products, such as bamboo  and wooden crafts, greeting cards, plastic bottles, fabric leather and so on. 

It is one-time investment which can save around 7,000.00-9,000.00 USD  of ink consumables per year; The work cost is low and the power  consumption of the main body of machine is less than 1 Kw/h. 

Engraving depth is controllable to perform surface marking or deep  engraving. The engraved product is not easy to corrode and deform .