Tam otomatik tekstil ve giyim endüstriyel lazer kesim makinesi

Piyasadaki daha hızlı lazer oyma makinesi;

Daha yüksek üretkenlik ve daha düşük işletme maliyetleri.

Pengetsaan laser dan penandaan nomor seri, tag banteng, gantungan kunci

Fully automatic laser cutting machine Automatic feeding laser cutting machine Fully automatic fabric cutting machine

Five-axis linkage cutting with three-dimensional programming which is easy to learn. Machine is good at cutting complex 3D materials.

The laser is non-contact cutting without mechanical stress. Its simple positioning fifixtures have low cost, and can be used cyclically  for permanent use.

Machine will learn the movement track required by the user with various control parameters. It will form the program file and transfer to the motion control card, and then move according to the program file to processing the product.

The cutting edge is smooth, burr-free, high precision, high efficiency .   

Large format table design for large size non-metallic materials. And the height of the work surface is designed to conform to human mechanics. Machine can cut large areas of wool, artificial leather. 

White cloth cutting will have no yellow edges, clean cloth cutting will have no hard edges, and fluffy cloth cutting will not burn extra furs. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

Combined with rich practical experience, the cutting process is continuously improved, and it is listed top at the domestic market   in the field of cutting of fiber-made boards (such as acoustic/PET panels).    

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

Automatic intelligent line drawing, cutting Laser cutting machine, an automatic intelligent upper line drawing and cutting equipment developed for the shoe upper automatic drawing line, used to replace the traditional shoe making process such as manual line drawing and screen printing. 

No tool change during processing operations 

Flexibility and customization 

Neat and sealed edges even in case of micro-holes 

No material waste 

Rapid and precise micro-drilling 

Minimum use of power resources 

Micro-drilling would be impossible through other systems

Laser engraving from wood, leather, cardboard, glass and plastics 

Laser cutting from thin (up to 3-5mm) wood, leather, textiles and plastics

 Chanxan pioneered the patented product and cut the hot melt adhesive for the upper; 

 Solve the edge of the hot melt adhesive and the uneven pressing phenomenon; 

 Non-contact cutting, product efficiency and standard; 

 Intelligent typesetting, maximizing material saving; Easy to learn and save labor; 

 Double feed table cross feed, fully automatic loading and unloading, improve work efficiency 3-5 times .    

1. High-precision servo screw motion system, tested by precision collimator during installation andaligning.

2. Excellent stop point restart function to effectively reduce the failure rate caused by improper operation.

3. Non-contact cutting with no mechanical stress to deliver niceand auto sealing cutting edge without deformation, no need for polishing.

4.  The high-power laser greatly improves the cutting and engraving speed up to 2-5 times faster, which can meet the efficient cutting of thick boards.    

• - Cotton fabric

• - Polyester or synthetic fibers

• - Denim or Jeans

• - Canvas

• - Fleece

• - Felt

• - Kevlar

• - Lace

• - Leather

• - Linen

• - Nylon fabric

• - Suede

• - Silk fabric

• - Wool 

Steady machine with imported laser source, marble platform, cast aluminum gantry structure and cast iron chassis. 

High-precision machine tools and high-precision servo and ball screw drive ensure position accuracy and dimensional accuracy,  better roundness and better corner effect.  

Stable running and energy control enable the machine to cut out the product's edge with less heat affected zone, smoother trimming  effect, and the effect is consistent.

The software has superior performance, and can realize the functions of layered cutting, cutting path optimization, laser energy  following speed, etc. The cutting effect is consistent and the material half-cut energy .  

1. Using projection technology to accurately align the flying woven upper

2. cutting speed is fast, laser head can be selected according to requirements

3. the equipment is stable, easy to operate

4. the projector has high pixel, thin lines and more accurate positioning

5. the machine has low energy consumption, is the necessary equipment for the production of flying woven uppers

6. Chanxan exclusive technology can cut multi-layer composite midsole material   

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge.

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-off  continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.