Cn

Mobile Phone: 18255564088

News
News

Key Words: PCB DepanelingLaser Marking Medical DeviceCover layer film cuttingHandheld Laser Welder

Home > News > Industry News

co2 Laser Marking Machine Kiss Cutting

Publish Time: Dec. 06, 2021

【Description】:

Laser kiss cutting is used to cut the top layer of a material without cutting through an attached material.

Laser kiss cutting

Laser kiss cutting is used to cut the top layer of a material without cutting through an attached material.

Sticker labels are a good example of laser kiss cutting  in action.

The outline of the label can be cut without cutting through the backing mater

High power CO2 laser marking machine kiss cutting reflective engraved film or heat transfer film(HTV), is a relatively common application.

Many to the sports brand OEM factories, mass production of clothing and shoe LOGO, are to use CO2 marking machine to do kiss cutting work.

Processing equipment: laser cutting machine


co2 Laser Marking Machine Kiss Cutting

Adaptation: Suitable for transfer printing production of clothing sports numbers, logos, text, personalized patterns, etc., heat transfer printing production of advertisements and posters, as long as there is a computer and a simple cutting plotter, the transfer pattern production and processing can be completed, simple and easy Row.


  The super engraving film laser marking machine produced by Chanxan laser has thinner cutting lines than ordinary laser marking machines, so there are fewer black impurities left in the cutting, and the cutting effect is more refined and beautiful.

co2 Laser Marking Machine Kiss Cutting

  Instructions for use


   1. After the computer engraving software draws the pattern, it needs to be mirrored, and then cut with a laser marking machine.


   2. Cut out the engraved lettering film.


  3. The lettering film is facing down, and the self-contained film is facing up for transfer. Both heat transfer machines and electric irons can be hot stamped,


   4. Hot stamping temperature between 155-165℃, 10- 15 seconds will do. Cold tear after transfer.


Previous: silicone laser engraving

Next: Heat Transfer Paper Laser Engraving Machine