Surgical Mask/ Medical Mask Cutting Machine With Ce

 Chanxan pioneered the patented product and cut the hot melt adhesive for the upper; 

 Solve the edge of the hot melt adhesive and the uneven pressing phenomenon; 

 Non-contact cutting, product efficiency and standard; 

 Intelligent typesetting, maximizing material saving; Easy to learn and save labor; 

 Double feed table cross feed, fully automatic loading and unloading, improve work efficiency 3-5 times .    

Chanxan's first patented product, the exclusive technology can perfectly cut 3mm thick midsole plate 

Move the countertops to greatly increase production efficiency 

Non-contact cutting, more standard products Intelligent typography cuts small seams and saves materials up to 20% Beautiful cut, material cut is not black One-stop solution for grading, typesetting and cutting, so that production is worry-free 

No need for die, cost savings and fast proofing Easy to learn and easy to learn, no safety hazards

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Five-axis linkage cutting with three-dimensional programming which is easy to learn. Machine is good at cutting complex 3D materials.

The laser is non-contact cutting without mechanical stress. Its simple positioning fifixtures have low cost, and can be used cyclically  for permanent use.

Machine will learn the movement track required by the user with various control parameters. It will form the program file and transfer to the motion control card, and then move according to the program file to processing the product.

The cutting edge is smooth, burr-free, high precision, high efficiency .   

• - Cotton fabric

• - Polyester or synthetic fibers

• - Denim or Jeans

• - Canvas

• - Fleece

• - Felt

• - Kevlar

• - Lace

• - Leather

• - Linen

• - Nylon fabric

• - Suede

• - Silk fabric

• - Wool 

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. 

And machine is with power-off  continuous carving, slope carving function. Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect.  

The software design path can be optimized as needed to reduce processing time and improve efficiency. CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

extreme accuracy 

clean cuts and sealed fabric edges to prevent fraying 

can be used to cut many different materials, like silk, nylon, leather, neoprene, polyester and cotton 

no need to touch the garment 

no unintended marks left on the foam

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-offr   continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

With a CO2 laser you can cut acrylic glass and get flame-polished edges without additional material processing.