Plexiglass Laser Cutting Machine

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge.

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-off  continuous carving, slope carving function.

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-off continuous carving, slope carving function. 

 Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

 With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect. 

 The software design path can be optimized as needed to reduce processing time and improve efficiency. CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency  

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

1. Using projection technology to accurately align the flying woven upper

2. cutting speed is fast, laser head can be selected according to requirements

3. the equipment is stable, easy to operate

4. the projector has high pixel, thin lines and more accurate positioning

5. the machine has low energy consumption, is the necessary equipment for the production of flying woven uppers

6. Chanxan exclusive technology can cut multi-layer composite midsole material   

1. High-precision servo screw motion system, tested by precision collimator during installation andaligning.

2. Excellent stop point restart function to effectively reduce the failure rate caused by improper operation.

3. Non-contact cutting with no mechanical stress to deliver niceand auto sealing cutting edge without deformation, no need for polishing.

4.  The high-power laser greatly improves the cutting and engraving speed up to 2-5 times faster, which can meet the efficient cutting of thick boards.    

Laser engraving from wood, leather, cardboard, glass and plastics 

Laser cutting from thin (up to 3-5mm) wood, leather, textiles and plastics

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-offr   continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

Faster than a cutting plotter

more precise than punching dies

more economical for small series up to 1,000 pieces

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Laser Machine Combo Set

extreme accuracy 

clean cuts and sealed fabric edges to prevent fraying 

can be used to cut many different materials, like silk, nylon, leather, neoprene, polyester and cotton 

no need to touch the garment 

no unintended marks left on the fabric

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.