automatic fabric non-woven Hijab scarf laser cutting machine

Innovative process development, avoiding the problem of traditional laser cutting of the edge-smoked black smoked black.

High-performance motherboard, anti-interference, more complete data output, power-off continuous carving, slope carving.

Fast curve cutting function: Any curve can be cut continuously in rapid succession.

With power, frequency and speed follow function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect.

The software design path can be optimized as needed to reduce processing time and improve efficiency.

1. The software recognizes the contour of the graphic, automatically generates the cutting path and completes the cutting. The waste of materials and time caused by inaccurate positioning is avoided.

2. Machine supports camera calibration compensation, and corrects the overall offset that occurs after the device has been running for a period of time to ensure accurate contour cutting.

3. The Residual Amount Control System is used to detect the length of the cloth balance by the sensor probe, and the feeding motor is automatically turned on and off to achieve the free and non-stretching conveyance of the cloth.

4. High pixel capture graphics with a maximum recognition area of up to 4 square meters.   

extreme accuracy 

clean cuts and sealed fabric edges to prevent fraying 

can be used to cut many different materials, like silk, nylon, leather, neoprene, polyester and cotton 

no need to touch the garment 

no unintended marks left on the fabric

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

 Multi-head cutting, high speed and high efficiency Chanxan exclusive design cutting aircraft board shoe material is particularly efficient 

 The equipment is stable and easy to operate. 

 The shoe material is cut and cut beautifully, and the hollowing out and the small hole are fast. 

 The whole machine has low energy consumption and the equipment is cost-effective.    

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Laser engraving from wood, leather, cardboard, glass and plastics 

Laser cutting from thin (up to 3-5mm) wood, leather, textiles and plastics

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-offr   continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

1.Large format table design for large size non-metallic materials. And the height of the work surface is designed to conform to   human mechanics. 

2. Machine can cut large areas of wool, artificial leather. White cloth cutting will have no yellow edges, clean cloth cutting will have no   hard edges, and fluffy cloth cutting will not burn extra furs. 

3. With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes   sharp angle cutting technology more perfect.

4. Combined with rich practical experience, the cutting process is continuously improved, and it is listed top at the domestic market   in the fifield of cutting of fiber-made boards (such as acoustic /PET panels).

No tool change during processing operations 

Flexibility and customization 

Neat and sealed edges even in case of micro-holes 

No material waste 

Rapid and precise micro-drilling 

Minimum use of power resources 

Micro-drilling would be impossible through other systems

Exclusive process development to avoid the problem of traditional laser cutting with yellow or dark edge. 

High-performance motherboard with anti-jamming feature can output more complete data. And machine is with power-offr   continuous carving, slope carving function. 

Fast curve cutting function. Any curve can be cut continuously in rapid succession. 

With power, frequency and speed following function, it effectively reduces corner burrs; corner energy following technology makes  sharp angle cutting technology more perfect. 

The software design path can be optimized as needed to reduce processing time and improve efficiency. 

CCD cameras, stainless steel baseboard or other parts could be added to meet the requirements and improve the efficiency.

Faster laser engraving machine on the market; 

Higher productivity and lower operating costs.

Cut with high precision 

Flexible operation interface 

High performance step motor 

Imported axletree Straight-line slide-way 

Perfect optical system 

Multiplicate data transmission mode  

Innovative process development, avoiding the problem of traditional laser cutting of the edge-smoked black smoked black.

High-performance motherboard, anti-interference, more complete data output, power-off continuous carving, slope carving.

Fast curve cutting function: Any curve can be cut continuously in rapid succession.

With power, frequency and speed follow function, it effectively reduces corner burrs; corner energy following technology makes sharp angle cutting technology more perfect.

The software design path can be optimized as needed to reduce processing time and improve efficiency.