Denim laser engraving machine

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.  The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  .

 1.Engraving depth is controllable to perform surface marking or deep   engraving, even quick cutting. 

 2. The marking range is up to 600*600mm, which breaks the limitation  of the range of glass tube marking and provides a more efficient and   high quality solution for denim whitening, hole cutting and upper cutting. 

 3. Increase product value, permanent mark can be anti-counterfeit,   non-contact mark and no pollution, can be layered, and achieve the   perfect combination of surface engraving, hollowing and cutting. 

 4. With 3D dynamic focusing system which beautifully compensated for the weakening effect of the edge of the traditional machine.       

stainless steel, alloyed steels

aluminum, anodized aluminum

titanium, titanium alloys

brass

copper, other precious metals

coated metals

PA, PC, PE, PET, PMMA

silicone or many other plastics

 The heat-affected zone is extremely small, avoiding deformation, damage or charing of the material to be processed,  and the yield is high. Applied on various materials to make up short comings of fiber laser or CO2 laser marking. 

 High photoelectric conversion rate, 355nm output wavelength, beautiful engraving effect, good touch feeling, high anti-counter feiting effect. 

 Products are widely used in micro-machining, fine engraving of various metal and non-metal film materials. 

Suitable for large-area engraving marking of various non-metallic materials; layered setting, perfect combination of surface engraving, hollowing and cutting. 

It can be applied to the cutting of soft and low-density sheets. It has strong laser energy, fine beam and small mechanical stress.  The cutting speed is 5-10 times higher than that of traditional cutting machines. 

Ideal for marking rolled fabrics, marking on jeans to get different marking effects and flying marking. 

Fully enclosed optical path, imported CO2 RF laser, and strict multiple protection control design  .